Model: TPFS-12X41-09
Volumetric Piston Pump Fill Station
(Air Actuated)

STANDARD FEATURES

• All product contact surfaces are 316L stainless steel as protection against hot high acid products such as tomato based sauses.
• Dispensing volume is adjustable by means of a manual hand wheel and lead screw for a range of 31 ozs. to 128 ozs.
• Unit is equipped with a 3" inlet port (product suction side) and delivered into a flexible casing container via a 2" vertical feedline. A heat shield is provided at the dispense valve to avoid burns when hot filling the casings.
• To activate a fill cycle requires the operator to step on the furnished foot pedal for a manual metered filling, or as a continuous transfer operation from kettle, or during clean up.
• The unit is mobile and mounted on (4) lockable, swivel polyurethane casters.
• Pneumatic flow controls are furnished to regulate cycle speed as required for fill volumes.
• An adjustable pouch holder is furnished to hold a supply of pouches or casings.
• An adjustable work surface is furnished directly below the fill/dispense valve as support for the filled casing during clip and cutoff operation.
• Unit is furnished with (2) separate air filter/lubricator/regulator assemblies to protect the pump air operated components and another for the tipper tie. No electricity is required.
• Unit is designed for daily cleaning by wash down and in-sink cleaning and sanitizing of all product contact components by disassembly without tools as required by NSF, U.S.D.A. and F.D.A. for sanitation requirements.
• Unit is equipped with 10 ft. airline hose to connect with customer air supply.
• Unit is equipped with (2) 3-ft sanitary flex lines to connect pump to kettle with clamps and gaskets.
• Frame acts as a surge tank for compressed air with automatic water drain.
• Casing clipper - model Z-4100H, air operated casing clipper as made by tipper tie and mounted as part of the pump station. Includes automatic clip feeding mechanism, safety shut-off valve, and air pressure gauge.